CC1101 Wireless Module External Aerial Based On Arduino Module

Description:

• Working voltage: 1.8 V-3.6 V, recommend 3.3 V.
• 433 MHz spectrum use free license.
• Highest rate at 500 KBPS, which support 2-FSK, GFSK and MSK modulation mode.
• Modify baud rate with software, better requirement for customers in different conditions of use:
    High baud rate: faster data transfer rate
    Low baud rate: more strong anti-jamming and penetration ability, the transmission 
    distance further
• High sensitivity (1.2 Kbps down-110 dBm, 1% packet ber)
• Built-in hardware CRC(inspection wrong and point-to-multipoint address control)
• Lower consumption(RX, 15.6 mA, 2.4 Kbps, which 433 MHz)
• Can be programmed to control the output power, for all the support frequency can reach + 10 dBm
• Wake-up wireless, support low power electromagnetic wave activated,and wake on lower consumption device
• Before transmission channel access will be cleaned up automatically (CCA), named carrier protected reliably against detective system
• Fast frequency changes brought the right frequency synthesizer jumping system
• Module can be set address software, software programming is very convenient
• The standard DIP spacing interface, easy to embedded applications
• Separate 64 bytes RX and TX data FIFO
• Open the actual transmission distances of up to 200 meters above (depending on the specific environment and Communication baud rate, etc and decide)

Competitive Advantage:

1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World. 
4. High Quality With Global Standards. 
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment